Installation Instructions for Cork Roll
Use Cork Rolls to Design a Cork Wall & Tacking area
Tools & Materials Needed For A Professional Installation:
- Sharp Utility Knife, Carpet or Linoleum Blade
- Adhesive – recommended Henry Brand #356 or #176 (or comparable vinyl adhesive)
- 3/16” x 5/32” V-Notched Trowel
- Brads/Headless Nails
(All materials needed, including adhesive, available at True Value, Do It Best or your local hardware store)
Preparation: Be sure wall is clean, dry and that existing surface is secure.
Cutting: The cork can be trimmed with a utility knife, carpet or linoleum blade. It may require more than one pass.
Adhesive: We recommend Henry Brand #356 or #176 applied with a v-notched trowel. Apply 100% adhesive coverage to the wall surface being corked.
Installation: After careful application of adhesive, lightly position the cork, and if correct press firmly in place (Rolling is recommended). Hammer brads/headless nails into all corners and areas that may not adhere.
Finishing: Cork is a wood product and can be stained, painted or varnished. We suggest you test on spare piece first. For the perfect built-in bulletin board, you may tack picture frame molding around the cork.
The perfect wall: A cork wall covering does not show scratches, dents or nail holes. Ideal pin-up area. Absorbs unwanted noises. You may use fine sandpaper to remove any unwanted marks. Our toll free number is 1.800.663.1921.