This page was exported from Manton Cork
Export date: Mon Mar 30 17:06:33 2020 / +0000 GMT
Using Cork Rolls or Cork Sheets to Design a Cork Wall & Tacking area Tools & Materials Needed For A Professional Installation:
All material needed, including HENRY BRAND #356 adhesive, available at Amazon Fulfillment, True Value, Do It Best or your local hardware store. HENRY BRAND adhesives are available for on-line purchase at www.truevalue.com , www.doitbest.com or www.acehardware.com
For ease of installation, unwind cork, pre-cut – invert pieces & place weight(s) to flatten. Be sure wall is clean, dry and that the existing surface is secure.
The cork can be trimmed with a utility knife, carpet or linoleum blade. It may require more than one pass.
We recommend Henry Brand #356 or #176 applied with a v-notched trowel. Apply 100% adhesive coverage to the wall surface.
After careful application of adhesive, lightly position the cork sheet*, and press firmly in place (rolling is recommended). Use brads/headless nails in all corners and areas that may not adhere.
Cork is a wood product and can be stained, painted or varnished. We suggest you test on spare piece first. For the perfect built-in bulletin board, you may tack picture frame molding around the cork.
<h46) The perfect wall:
Cork wall covering does not show scratches, dents or nail holes. Ideal pin-up area. Absorbs unwanted noises. Easy to maintain. Use fine sandpaper to remove any unwanted marks.
*FOR EASE OF INSTALLATION, we recommend gluing side identified with label on cork roll, to your wall or substrate.
Post date: 2019-01-03 23:37:20
Post date GMT: 2019-01-03 23:37:20
Post modified date: 2019-11-11 14:48:38
Post modified date GMT: 2019-11-11 14:48:38
Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com